Roofing Products

This Roofing System is designed to provide fall protection to persons working on roof structure within wood frame construction. This system offers a temporary anchorage point for that worker's fall arrest system.

These systems are rated at 310 lb. (140 kg). The combination of the user's weight, clothing and tools may not exceed 310 lb. (140 kg). When properly installed, the roofing brackets are designed and tested with a 5,400 lb. (24 kN) minimum breaking strength.

Our Roofing Systems including the following components..

• Roofing bracket - galvanized steel roof peak anchor with forged D-ring;
• Screws - #12 x 27/8 in. with #3 Phillips pan head;
  
• Lifeline - three strand, 5/8 in. (16 mm) diameter synthetic lifeline supplied in various lengths (25 ft. or 50 ft in package systems.) with an eye splice thimble and 3/4 in. self-locking snap hook and end splice to prevent run off to the Gripgrab rope adjuster.
• Gripgrab rope adjuster - cam lever rope adjuster designed to be used with various types of 5/8 in. (16 mm) diameter three-strand lifeline ropes. Gripgrab rope adjuster is directly sewn to shock-absorbing lanyard. It meets ANSI Z359.1.
  
• Shock-absorbing lanyard - directly sewn to rope adjuster, it is designed to allow dissipation of energy by extending the deceleration distance. Meets ANSI Z359.1 and CSA Z259.11.
• Harness - fall protection full body harness with center back D-ring. Meets ANSI Z359.1 and CSA Z259.10.

These packages come with full instructions and are package in a pail.

Polyblend lifeline with eye splice thimble 3/4 steel self locking snap hook and end splice

Fall Protection Material Handling

  Tirfor/Griphoist   Chain Hoist   Beam Clamps   

Lever Hoist   Gripwinch   Minifor  Dynafor   Dynarope  Harnesses  Lanyards   Rope Grabs

Tower Harnesses   Confined Space   Retractable Lifelines   Horizontal Lifelines Roofer System

Call Us Toll Free 1-866-490-6639